14 | 15
STANDARD REDUCER
Use T494 or P980-5000 Thinner for
standard reduction up to 95°F/35°C
AND humidity greater than 30%.
HIGH TEMP/LOW HUMIDITY REDUCER
T595 and P980-5085 High Temp/Low
Humidity Thinner are available for
temperatures above 95°F/35°C AND
humidity below 30% RH.
NOTE: Use High Temp/Low Humidity
Reducer only when both conditions
are present. If used outside of these
conditions, extended flash times
may occur.
TIP: When in doubt, check viscosity
to ensure 23–28 seconds. See next page
for viscosity details.
ADJUSTER OPTION
Use of T492 or P925-1250 Adjuster
enhances the basecoat film
properties and is ideal for use on
leading edge parts, such as bumpers,
fascias or low-profile front ends.
NOTE: T492 or P935-1250 Adjuster
can be used in all mixes to improve
application window. Do not exceed 10%
of color volume.
MODIFIER OPTION
Use of T493 or P935-1255 Modifier
provides basecoat with the highest
level of film integrity. Always use in
conjunction with Adjuster and DO NOT
exceed 5%.
NOTE: Pot life is reduced to 1 hour
when modifier is used. Check with your
PPG rep for further details.
SELECTING THE REDUCER
REDUCER MIXING % 1 Part Color:
10%—Solid Colors
30%—Tinted Midcoat
20%—Metallic/Pearls