CAUTION: WEAR THE PROPER SAFETY PROTECTION DURING THIS PROCESS. REFER TO SPECIFIC PRODUCT DATA SHEET FOR
APPLICATION AND PRODUCT DETAILS
1 Clean area to be sealed with Wax and Grease Remover and/or SWX350 waterborne cleaner and dry with clean towels. Use
the one direction wiping method.
2 Mask vehicle appropriately according to process document Vehicle Masking Process.
3 Look up the formula for the topcoat and identify the recommended spectral gray G-shade for the sealer and mix according to
product instructions.
4 Tack off the repair area and apply a medium wet coat to the repair, following product instructions. For spot repairs, keep t he
sealer confined to as small an area as possible.
5 If a second coat is necessary, allow the sealer to flash to a uniform, dull appearance before applying the next coat.
6 Then, to create a smoother transition, melt in the sealer edges using a blending solvent. Or, after the sealer has dried
thoroughly, lightly scuff the sealer edges with P800 grit sandpaper.
7 When complete, the repair is ready for the application of the basecoat.
Page 7-1
PD-0701 PRIMER
SEALER
APPLICATION
