Issue link: https://ppgrefinish-na.uberflip.com/i/1302709
For ordering information, contact your 3M Sales Representative Product List Think About Your Health 3M ™ E-A-R ™ Skull Screws ™ Ear Plug, PN P1300 3M ™ Lexa ™ Protective Eyewear, PN 15200 3M ™ Particulate Respirator N95, PN 07185 3M ™ Trizact ™ Hookit ™ Clearcoat Sanding Disc, 6 in., P1500, PN 02088 3M ™ Purple Finishing Film Hookit ™ Disc, 6 in., P1500, PN 30667; P2000, PN 30666 3M ™ Trizact ™ Hookit ™ Foam Disc, 6 in., 3000, PN 02085; 6 in., 5000 grit, PN 30662 Festool D150 Thin Interface Pad, PN 29939 3M ™ Perfect-It ™ EX Rubbing Compound, 1 qt., PN 36060 3M ™ Perfect-It ™ Foam Compounding Pad, Double Sided, Quick Connect, 9 in., PN 05706 3M ™ Perfect-It ™ Foam Polishing Pad, Double Sided, Quick Connect, 9 in., PN 05707 3M ™ Perfect-It ™ EX Machine Polish, 1 qt., PN 06094 3M ™ Quick Connect Adaptor, 14mm. Thread, PN 33271 3M ™ Perfect-It ™ Low Linting 100% Wool Compound Pad, Double Sided, Quick Connect, PN 33279 3M ™ Inspection Spray, 1 gallon, PN 06082 3M ™ Perfect-It ™ EX Ultrafine Machine Polish, 1 qt., PN 06068 3M ™ Perfect-It ™ Ultrafine Foam Polishing Pad, Double Sided, Quick Connect, 9 in., PN 05708 3M ™ Perfect-It ™ Detail Cloth, PN 06016; PN 06020 3M ™ SUN GUN ™ II Light Kit, PN 16550 3M ™ Perfect-It ™ Clean and Shine, 16 fl. oz. bottle, PN 06084 Paint Finish Full Panel Process 1 Initial Defect Removal Texture Match DA sand the repair area with a P1500/P2000 3M ™ Purple Finishing Film Hookit ™ Disc or P1500 3M ™ Trizact ™ Clearcoat Sanding Disc used damp. Remove all paint defects and match texture to adjacent OEM panels. Wipe panel clean. 2 Scratch Refinement 3000 Refine the P1500/P2000 scratches with a DA and a 3000 3M ™ Trizact ™ Hookit ™ Foam Disc used damp with a 3M ™ Hookit ™ Soft Interface Pad. Wipe panel clean. 3 4 5 Machine Polish Polish the repair area with a high speed polisher set between 1200–2000 RPM. Use a black foam polishing pad and the appropriate machine polish. Wipe the panel clean with a yellow microfiber cloth. 6 Ultrafine Machine Polish (Optional- For Dark Colors such as Black) Polish the repair area with a high speed polisher with the speed set between 1200–2000 RPM. Use a blue foam polishing pad and the appropriate ultrafine machine polish. Leave a light film of the polish on the panel and wipe clean with a blue microfiber cloth. Final Detail Remove any masking material from the repair area and clean any residual sling from adjacent panels and door jamb areas. Cleaning the panel immediately after compounding and polishing will greatly improve the ease of cleaning. Inspect the surface using the 3M ™ SUN GUN ™ II Light Kit. Visit www.3MCollision.com for more SOPs and videos Standard Operating Procedures Paint Finishing and Detailing Compound the repair area with a high speed polisher set between 1200–2000 RPM. For faster results, use the low-lint wool pad and the appropriate rubbing compound. To insure all sand scratches have been removed, inspect the surface by spraying with an Inspection Spray and wipe clean with a yellow microfiber cloth Compound