PPG Training

Custom Restoration Guide 2017

Issue link: https://ppgrefinish-na.uberflip.com/i/866918

Contents of this Issue

Navigation

Page 117 of 153

118 LACQUER COLOR APPLICATION PD-1721 Caution: Wear the proper safety protection when sanding, cleaning, mixing and spraying all materials included within this process. 1 Lacquer color can be applied as a single-stage or as a basecoat. 2 Lacquer colors are designed to be applied over properly cleaned and sanded DPLF Epoxy Primer or DZ KONDAR ® Acrylic Primer Surfacers. Finish sand primer surfacer with P320-400 grit sandpaper. 3 Lacquer color has a simple mix ratio. 4 SINGLE-STAGE: Lacquer single-stage color is applied in 4-6 full wet coats. Follow the PDS recommendations for flash, air dry and bake times. BASECOAT: Apply 2-4 coats or until hiding to achieve proper coverage. CLEARCOAT: DCA468 DURACRYL ® Hi-Performance Clear can be applied over lacquer single-stage and basecoat color. Follow the PDS recommendations for mix, application and dry times. 5 Lacquer color must be polished to achieve full gloss after an overnight air dry or after a bake and cool down. Polishing procedures for lacquer color require a wool pad and a coarse compound such as 3M™ Super Duty 05954 to achieve final gloss and appearance.

Articles in this issue

Archives of this issue

view archives of PPG Training - Custom Restoration Guide 2017