PPG Training

Custom Restoration Guide 2017

Issue link: https://ppgrefinish-na.uberflip.com/i/866918

Contents of this Issue

Navigation

Page 73 of 153

74 SPRAY GUN CLEANUP QUICK CHANGE CUP SYSTEM Caution: Wear the proper safety protection when sanding, cleaning, mixing and spraying all materials included within this process. 1 Use a disposable spray gun cup or a cup with a disposable liner. 2 Invert spray gun, pull trigger to release paint and remove gun cup. Dispose of leftover paint. 3 Remove air cap and clean it with a soft bristle brush and cleaning solvent. 4 Trigger the spray gun and remove the fluid tip with fluid tip wrench and clean it with a soft bristle brush and cleaning solvent. 5 Remove the fluid needle and wipe it clean with cleaning solvent. 6 Flush spray gun with cleaning solvent through the hole where the gun cup attaches. Flush until clean. 7 Wipe all parts and spray gun body dry with soft cloth. 8 Reinstall fluid needle while triggering the gun. 9 Lubricate according to spray gun manufacturer with approved spray gun lube. PD-0420

Articles in this issue

Archives of this issue

view archives of PPG Training - Custom Restoration Guide 2017