PPG Training

Custom Restoration Guide 2018

Issue link: https://ppgrefinish-na.uberflip.com/i/982460

Contents of this Issue

Navigation

Page 30 of 155

31 CHEMICALLY STRIPPED BARE METAL PD-1152 Caution: Wear the proper safety protection when sanding, cleaning, mixing and spraying all materials included within this process. There is no sanding in this process. One explanation may be that the work is on a newer vehicle. 1 After paint removal, if rust or old body filler still exists use PD-1154. 2 Perform metal treatment* process (reference PDS OC-36 for detailed instructions). Steel: Use SX579 / SX520 Aluminum: Use SX533 /SX503 CAUTION: Do NOT apply etch primers or body filler directly over these metal treatment products. *Cannot be used in some areas due to VOC or heavy metal restrictions. Proceed directly to epoxy primer. 3 Apply epoxy primer. 4 Complete welding, rust repairs and sheet metal patching. 5 Clean with the appropriate PPG cleaner. 6 Reapply epoxy primer for corrosion protection. 7 Proceed to body work. Refer to the Body Filler Process, PD-1180.

Articles in this issue

Archives of this issue

view archives of PPG Training - Custom Restoration Guide 2018